FORD 347 STROKER

347 Ford Stroker Engine
Circle Track Engine Pictured

Click on Engine to Hear Sound Clip from Dynometer Testing
(download time approximately 45 seconds at 28.8 bps)


This Engine is a proven purebred race combination.  The 347 Ford Stroker engine is the perfect option for the Mustang and other Ford Vehicles with 302 c.i.d. (5.0 Liter) engines.  At 347 c.i.d. and no exterior dimensional changes, this engine is a bolt-in ready-to-go engine combination.  With increased cubic inches, increased compression ratio, and a variety of workable cam and cylinder head combinations, this engine is a great way to add horsepower to your race car or performance vehicle while staying within the weight range of a stock 302 engine.

The short block is a seasoned 302 c.i.d. block that has been thermally cleaned, bored, honed, and line bored.  This engine is also balanced, decked, and built in our own facilities.  Prior to completion as a long block, an aluminum stud girdle is added to strengthen the block during high RPM's. 

Parts include the following:

Block: Seasoned 2-Bolt Ford Block
Thermally Cleaned
Magnafluxed
Bored & Honed
New: Cam Bearings, Brass Freeze Plugs, Galley Plugs
Stud Girdle: Aluminum Main Girdle
Crankshaft: Cast Crankshaft; .010/.010 or STD/STD
Cross-Drilled for better oil flow
Micro-Polished
Rods: Elgin® or Eagle® H-Beam with Arp® Rod Bolts
Bearings: Clevite 77
Pistons: Keith Black Hypereutectic® or Federal Mogul®
Rings: SpeedPro® or Hastings® Performance
Timing: Double-Roller
Flywheel: Automatic Heavy-Duty (Manual Transmission, Add Cost of Flywheel)
Oil Pump: Federal Mogul®-Clevite®
Harmonic Balancer: Stock or Fluidampner®
Gaskets: Fel-Pro® Racing Gaskets
Heads: Dart®/World Products® 64cc Chambers/2.02 intake and 1.6 exhaust valves
Pushrods: Crane®/Competition Cams®/ or Federal Mogul® Hardened
Rocker Arms: Crane® Roller
Cam & Lifters: Crane®/Competition Cams®/Federal Mogul®/ or Clevite® Flat Tappet, Hydraulic, or Solid
Distributor: MSD®
Wires: Taylor®/MSD®
Manifold: Weiand® Stealth
Carburetor: Holley®/Carter®/ or Edelbrock®
Fuel Pump: Holley® or Carter®
Fuel Lines: Stock (non-dress)
Oil Pan and Valve Covers: Stock Painted or Chrome
Water Pump: New Federal Mogul®
Oil Dipstick: Mr. Gaskets®
Oil Filter: FRAM®

*ROTATING ASSEMBLY IS BALANCED*

*Does not come with senders/wire-looms.

Dyno-tested and ready to bolt-in with minor additions such as pulleys, alternator & brackets, power steering & brackets, etc. 
These items could be shipped to A.R.I. and added at slight addition to cost.

To place an order for this engine, you may either telephone A.R.I. at 1-816-765-4881 from 8:00 until 4:30 (Central Standard Time) Monday through Friday.  We are located just 5 minutes South of Kansas City, Missouri U.S.A.  You may also ask questions or begin your order by e-mailing dla@engine-parts.com.  We welcome International inquiries!

Delivery terms include:

Kansas City Area - Pick-up or A.R.I. Delivery Available
(please call if located in metro area for delivery information)

U.S. - Shipped by Freight Truck

International (to countries with NO U.S. Trade Restrictions) - BAX Global


Anderson Racing Inc. 3911 Main St. Grandview, Missouri USA 64030

Phone: 816-765-4881 | Fax 816-765-9897