ARI Engines - 816-765-4881

Online Store
Shop NOW!!!

A.R.I.
Home
2.8-3.1
Stroker
2.8 Stroker
Shortblock
Performance Parts
Camshaft & Lifter Kits
Current
Price List
2.8 Stroker
Home Page

        A.R.I. Engines @ www.engine-parts.com
(816)-765-4881


GM 60 V6 2.8, 3.1, and 3.4L Pushrod Engine
Stroker Engines, Engine Kits, & Parts Online Catalog

START SHOPPING BY CHOOSING A LINK BELOW:
Featured Products & Specials Cylinder Heads & Parts Blocks & Crankshafts
Engines & Engine Kits Camshaft & Lifter Kits Manifold & Fuel System
Internal Parts & Gaskets Timing & Valve Train Stock 2.8L Options
Custom Engines &  Kits

NOTE: These Prices are for 2.8 Engines and Strokers only.  Within the GM 60 V6 family, there are interchangeable parts,
but some 3.1L and 3.4L Parts are Different and Need to Be Priced with the application info (i.e. Gasket Sets, Flywheels, etc.!!!)

CUSTOM DESIGNED AND BUILT ENGINES AND ENGINE KITS
A.R.I. offers many parts and different assemblies for this family of engines.  If you are new to building engines and figuring out what parts will work best for your application, we can help.  We have many combinations that have been used successfully in different applications, ranging from circle track to drag race to off-road to road race, along with the daily driver with a smooth idle and good power gain over the stock set-up. 
Basically, beyond the kit or shortblock, we custom build each engine.  If you are interested in A.R.I. building the complete longblock for you, the best thing to do is contact us at sales@engine-parts.com.  Let us know what you are interested in having done, the type of vehicle you have, transmission type, fuel pump type, and type of fuel delivery system your vehicle has.  We will send you an itemized list of the parts you select for your engine plus assembly labor and shipping for your approval.  After you approve and we receive payment, you will get your engine in 1-3 weeks (depending on work load and ship time).  Use the list below to get an idea of what is available for your engine and then contact us with what you want to do!

*Engine (Longblock and Shortblock) Prices do not include shipping. Shipping cost is usually between $145.00-$175.00 for a shortblock and $225.00-275.00 for a longblock to most of the continental USA.  Please e-mail sales@engine-parts.com with your city/state/zip code for shipping costs of a longblock or shortblock. 

INTERNATIONAL BIDDERS PLEASE E-MAIL FOR SHIPPING COSTS.   SHIPPING COSTS ARE THE SAME TO MOST CANADIAN ADDRESSES, PLEASE VERIFY BEFORE MAKING PURCHASE!

Engines & Engine Kits 1

Part #

Price*

BARE 2.8 Block for 2.8 or 2.8-3.1:  Bored to Piston Specs, Cam Bearings, Freeze Plugs.  Available with Purchase of Pistons or Kit from A.R.I.
NO CORE CHARGE
GMV6-28B

$375.00
Call or E-mail to Order

GM 2.8L Stock Remanufactured Shortblock (Less Cam & Timing) NO CORE CHARGE ON THIS SHORTBLOCK GMV6-28SB

$995.00
E-mail
or Call For Purchase

GM 2.8-3.1L Stroker Engine Basic Kit (need to specify piston size.  Available in 020, 030, 040, and 060 Oversizes) GMV6-2831K
Please Choose Oversize and enter vehicle info before adding to cart

 
$565.00

Select Bore Size
Enter Vehicle Make, Model, Year and Transmission Type (Auto/Std)
GM 2.8L-3.1L Stroker Engine Conversion Shortblock  (Less Cam & Timing) NO CORE CHARGE ON THIS SHORTBLOCK GMV6-2831SB

$1195.00
E-mail
or Call For Purchase

GM 2.8L-3.1L Stroker Engine Conversion Longblock GMV6-2831LB

E-mail or Call For Purchase
Pricing Varies Because
each is Custom Built

GM 2.8-3.4 Stroker Engine Converion Shortblock (Less Cam & Timing) NO CORE CHARGE ON THIS SHORTBLOCK GMV6-2834SB

$1395.00
E-mail
or Call For Purchase

GM 2.8-3.4 Stroker Engine Converion Longblock GMV6-2834LB

E-mail or Call For Purchase
Pricing Varies Because
each is Custom Built

1 There is NO CORE CHARGE shortblocks or bare blocks.   Longblocks have a Core Charge on the Cylinder Heads if Applicable.

*Prices do not include shipping!   Shipping cost is calculated for Continental USA Addresses Only!
PLEASE E-MAIL or CALL for International Orders.

***Upgrades are only applicable to purchase of Kit or Engine***
For Online Purchase, You must select the 2.8-3.1L Basic Stroker Kit listed
above to use the upgrade options below.

Kit & Engine Upgrade Options

Part #

Price*

Total Seal Gapless Rings for 2.8-3.1L Stroker Conversion
Special Order Only! Price Subject to Change

  Special Order - Call to Purchase

Add $198.74 to cost of Kit or Engine
Performance Moly Ring Set Upgrade for 2.8-3.1 Kit or Engine GMV6-UP1

Add $36.00 to cost of Kit or Engine

Performance Chrome or Moly Ring Set for 2.8-3.4 Kit or Engine GMV6-UP2 Add $36.00 to cost of Shortblock or Longblock
Hypereutectic Piston Upgrade for 2.8-3.1 Kit GMV6-UP3

Add $40.00 to cost of Kit or Engine

Hypereutectic Piston Upgrade for 2.8-3.4 Shortblock or Longblock GMV6-UP4 Add $40.00 to cost of Shortblock or Longblock
60-degree GM V6 Harmonic Balancer GMV6-HB1

$59.95

Automatic Flywheel Balanced for 2.8L Stroker Conversion (Note: Jeep Automatic Flywheels are Special Order and $109.95 plus $40.00 to balance) GMV6-FW2


GMV6-FW2JP

$54.95

Jeep: $149.95

Standard Flywheel, Surfaced & Machined for 2.8L Stroker Conversion GMV6-FW1

$170.00

Forged Pistons are available custom made only (any design/compression ratio/etc. you want), cost is currenlty $680.00 per set.  If you are interested in this option, please e-mail us with your vehicle specifics.  We will request additional information if necessary.

*Prices do not include shipping!

Shop Labor Prices & Core Charges

Price*

Assemble Longblock from Shortblock (REQUIRES Purchase of additional parts beyond basic shortblock to complete the build, this price is labor only) $200.00
Call or E-mail to Order
Pocket Port & Enlarge/Polish Exhaust Ports for Performance Heads (for Street Performance) (Requires you purchase a pair of heads from us or send your own heads in.  Additional labor charges may be applicable depending on condition of your heads) $350.00
Call or E-mail to Order
Computer Balance Rotating Assembly
(Using parts from ARI engine assembly or kit)
* REQUIRES PURCHASE OF HARMONIC BALANCER AND FLYWHEEL/FLEXPLATE (See Above)

$195.00

2.8 Stroker Engine Balance Standard Transmission Flywheel, Surface, & Install New Ring Gear (available if you send your own flywheel in to be balanced) $105.00
Call or E-mail to Order
Cross-Drill 2.8L Stock or Stroker Crankshaft

$125.00

Core Charges (If Applicable)
Core Charge for Standard Transmission Flywheel - if applicable $65.00
Core Charge for Cylinder Heads (per head, Aluminum or Cast Iron)) $45.00/head

*Prices do not include shipping!   Shipping cost is calculated for Continental USA Addresses Only!
PLEASE E-MAIL or CALL for International Orders.

E-mail sales@engine-parts.com for more information or to order
ARI Engines
816-765-4881


2001 Anderson Racing Inc. 3911 Main St. Grandview, Missouri 64030

http://www.engine-parts.com

Phone: 816-765-4881 | Fax 816-765-9897


About Us |Customer Support |ARI Home Page | Shopping Cart | Contact Us
Phone : 816-765-4881
Fax: 816-765-9897
Email : SALES@ENGINE-PARTS.COM

 

2004 A.R.I. Engines. All rights reserved.
Pro-Builder™ and www.engine-parts.com are property of Anderson Racing, Inc.